Parallel Connection
Enroll to start learning
Youβve not yet enrolled in this course. Please enroll for free to listen to audio lessons, classroom podcasts and take practice test.
Interactive Audio Lesson
Listen to a student-teacher conversation explaining the topic in a relatable way.
Understanding Parallel Connections
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Today, we're going to learn about parallel connections. Can anyone tell me what they know about circuits in parallel?
I think in a parallel circuit, all the components are connected to the same voltage source?
That's correct! In parallel circuits, every resistor has the same voltage across it. This means if we connect two resistors in parallel to a battery, each resistor experiences the full voltage of the battery.
What about the current? Does it stay the same like in a series?
Great question! Unlike a series connection where the current is the same through each component, the total current is split across the parallel resistors. The current through each resistor can be found using Ohm's Law: I = V/R.
So, if one resistor has a lower resistance, will more current go through it?
Exactly! Lower resistance allows for more current flow. This means the total current is the sum of the individual currents through each resistor.
What if we have three resistors in parallel, how do we find the total current?
You add up the individual currents through each resistor. So, if you know the voltage and the resistance values, you can find the individual currents and sum them up.
To summarize, in a parallel circuit, the voltage is the same for all components, and the total current is the sum of the currents through each branch.
Calculating Equivalent Resistance
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now, letβs dive into how we calculate the equivalent resistance for resistors in parallel. Who can remind me of the formula?
Is it 1/R_eq = 1/R_1 + 1/R_2 + ... + 1/R_n?
Correct! This formula helps us find the total resistance when resistors are in parallel. Remember, as you add more resistors, the equivalent resistance decreases.
What would happen if all the resistors had the same value?
Good observation! If you have n resistors of the same resistance R in parallel, the formula simplifies to R_eq = R/n. This shows how adding identical resistors reduces the equivalent resistance significantly.
Can you give us an example?
Absolutely! If you connect three 10-ohm resistors in parallel, the equivalent resistance R_eq would be 10/3, approximately 3.33 ohms. Always remember that R_eq will never be higher than the smallest resistor in the parallel circuit.
So, itβs like teamwork; they help each other to reduce the effort?
Thatβs a great analogy! The resistors are working together, which is why we see a decrease in resistance.
Applying Kirchhoffβs Rules to Parallel Circuits
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now, letβs apply Kirchhoffβs laws to our circuit. Can anyone tell me what the junction rule states?
At any junction in the circuit, the total current entering equals the total current leaving?
Exactly! This means we can set up equations based on the currents at a junction in a parallel circuit.
How do we apply the loop rule here?
The loop rule states that the sum of potential differences should equal zero. In a situation with voltage sources and resistors, the sum of the voltage drops should equal the voltage supplied.
Can we go through an example using Kirchhoffβs rules?
Sure! Let's say we have a 12 V source and two resistors, 3 ohms and 6 ohms in parallel. First, determine the total current using Ohm's Law to find the total resistance, then apply it to the loop for calculations.
Once we calculate all currents, how do we ensure they add up?
You would check that the sum of the individual branches equals the total current from the battery. This verifies our calculations and adheres to Kirchhoff's First Law.
Introduction & Overview
Read summaries of the section's main ideas at different levels of detail.
Quick Overview
Standard
Parallel connections allow components to share the same voltage while differing in current. This section explains how to calculate equivalent resistance, total current, and the various important parameters that define the behavior of parallel circuits.
Detailed
In a parallel connection, multiple resistors are connected across the same two potential points, ensuring that each resistor experiences the same voltage (V). Unlike in series connections where the same current flows through each resistor, in parallel, the current divides among the resistors. The total current (I_total) entering the junction is the sum of the currents through each resistor (I_total = I_1 + I_2 + ... + I_n). The equivalent resistance (R_eq) of the parallel resistors can be calculated using the formula: 1/R_eq = 1/R_1 + 1/R_2 + ... + 1/R_n. This leads to a situation where the overall resistance decreases as more resistors are added in parallel. The section emphasizes Ohm's law, Kirchhoffβs rules, and practical applications of parallel resistances.
Audio Book
Dive deep into the subject with an immersive audiobook experience.
Overview of Parallel Circuits
Chapter 1 of 3
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
β Resistors R1, R2,β¦, Rn in parallel share the same potential difference V. The currents through each branch are Ii=V/Ri. The total current is Itotal=βiIi.
Detailed Explanation
In a parallel circuit, resistors are connected so that they all receive the same voltage across them. This means that each resistor has its own current flowing through it, depending on its resistance. The total current flowing from the source is the sum of the currents through each individual resistor. This relationship can be expressed mathematically as I_total = I_1 + I_2 + ... + I_n, where I_total is the total current, and I_i represents the current through each resistor.
Examples & Analogies
Consider a water system where multiple pipes (resistors) are connected to a water tank (battery). The pressure in the tank is the same for all pipes (voltage), and water can flow through each pipe independently according to its size (resistance). The total amount of water flowing from the tank into all pipes at once is like the total current in the parallel circuit.
Calculating Total Current in a Parallel Circuit
Chapter 2 of 3
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
β The equivalent resistance is given by: 1/R_eq=1/R1+1/R2+β―+1/Rn.
Detailed Explanation
To find the total or equivalent resistance (R_eq) of resistors in parallel, we use the formula 1/R_eq = 1/R_1 + 1/R_2 + ... + 1/R_n. This means that the total resistance is less than the smallest individual resistor's resistance. The reason for this is that more pathways (resistors) allow more current to flow, effectively reducing the overall resistance. To calculate the equivalent resistance, you would first calculate the reciprocals of each resistor's resistance, sum those values, and then take the reciprocal of that sum to find R_eq.
Examples & Analogies
Imagine multiple water slides (resistors) leading into a pool (the total current). If you have more slides, more water can flow into the pool at the same time, which mimics the reduction in resistanceβit makes it easier for the 'current' (the water) to flow into the pool. If one slide is 5 meters wide (5 ohms), while another is 10 meters wide (10 ohms), the combined flow at the pool is greater than if you had just one slide, making the effective 'width' (resistance) into the pool lower.
Special Formula for Two Resistors in Parallel
Chapter 3 of 3
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
β For two resistors in parallel: R_eq=R1R2/(R1+R2).
Detailed Explanation
When you have two resistors in parallel, you can easily calculate the equivalent resistance using the formula R_eq = (R_1 * R_2) / (R_1 + R_2). This formula simplifies the calculation by directly using the values of both resistances. It shows how the combination of two resistances allows more current to flow while decreasing the total resistance.
Examples & Analogies
Think of a road with two lanes (resistors) leading to a destination (a light bulb). If one lane is wider (lower resistance) and the other narrower (higher resistance), cars can still flow through both, but more total cars can get to the destination with fewer delays when both lanes are open. The equivalent resistance for both lanes combined shows how they work together to facilitate the flow of traffic (current) efficiently.
Key Concepts
-
Parallel Connection: A circuit design where components share the same voltage and can have different currents.
-
Equivalent Resistance: The total resistance calculation for resistors in parallel, which decreases as resistors are added.
-
Ohm's Law: A fundamental principle for calculating the relationship between voltage, current, and resistance in electrical circuits.
Examples & Applications
Example: Two resistors in parallel, one 10 ohm and the other 20 ohm. The equivalent resistance would be calculated as: 1/R_eq = 1/10 + 1/20, resulting in R_eq = 6.67 ohms.
Example: A circuit with three resistors (5 ohm, 10 ohm, and 15 ohm). The total current supplied by a 12V battery would be calculated using individual branch currents and summing them.
Memory Aids
Interactive tools to help you remember key concepts
Rhymes
Parallel circuits run side by side, each getting voltage, the current divides.
Stories
Imagine a water slide with multiple paths; though each path gets the same starting height, not everyone ends up flowing the same quickly.
Memory Tools
PEAR = Parallel's Equivalent is found by Adding Inverses' Reciprocals.
Acronyms
P = Current, E = Equal Voltage, A = And Resistance decreases as resistors are added.
Flash Cards
Glossary
- Equivalent Resistance
The total resistance of a circuit that combines multiple resistors in parallel.
- Total Current
The sum of currents flowing through all branches in a parallel circuit.
- Ohm's Law
The principle stating that current is proportional to voltage and inversely proportional to resistance.
- Junction Rule
A principle stating that at any junction in a circuit, the total current entering equals the total current leaving.
- Loop Rule
The rule which states that the algebraic sum of potential differences around any closed loop in a circuit is zero.
Reference links
Supplementary resources to enhance your learning experience.