Series Connection
Enroll to start learning
Youβve not yet enrolled in this course. Please enroll for free to listen to audio lessons, classroom podcasts and take practice test.
Interactive Audio Lesson
Listen to a student-teacher conversation explaining the topic in a relatable way.
Series vs. Parallel Circuits
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Today we're going to explore series circuits. Can anyone tell me the basic difference between series and parallel circuits?
In a parallel circuit, the voltage across each branch is the same, but in a series circuit, itβs divided among the resistors, right?
Exactly! And in a series circuit, the current is the same. Remember an easy way to recall this: 'Series means same current, but split voltage'.
What happens if one resistor in a series circuit fails?
Great question! If one resistor fails, the entire circuit is broken, stopping the current flow. This is why understanding series circuits is crucial.
To summarize, series circuits feature the same current throughout but divide voltage. Can anyone explain how to find the total voltage?
The total voltage is the sum of the voltages across each resistor!
Correct! V_total = V_1 + V_2 + ... + V_n. Well done!
Calculating Equivalent Resistance
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now that we understand how current and voltage behave in series, letβs calculate equivalent resistance. Who remembers the formula?
I think you just add up all the resistances, right? R_eq = R_1 + R_2 + R_3...?
Exactly! So if we have resistors R_1 = 2Ξ©, R_2 = 3Ξ©, and R_3 = 5Ξ©, whatβs our equivalent resistance?
R_eq = 2 + 3 + 5 = 10Ξ©!
Spot on! And remember that the higher the resistance, the lower the current for a given voltage. How would you express Ohm's law in this context?
V = I Γ R, so if R increases, I decreases if V stays the same.
Exactly! Keep practicing those calculations. Letβs summarize: To find R_eq in a series circuit, simply add all the resistances together.
Voltage Division in Series Circuits
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now letβs discuss how voltage divides in a series circuit. What happens to the voltage across each resistor?
It gets divided based on their resistances?
Correct! Voltage drop across each resistor is proportional to its resistance. If we have a total voltage of 12V and two resistors, R_1 = 2Ξ© and R_2 = 6Ξ©, how do we find the voltage across each?
First, find R_eq = 2 + 6 = 8Ξ©. Then use the total voltage: V1 = V_total Γ (R1 / R_eq) = 12 Γ (2 / 8) = 3V.
Well done! V2 would then be 12V - 3V = 9V. You've grasped the concept of voltage division. Remember, you always calculate each voltage drop based on the ratio of each resistorβs value to the total resistance.
So if one resistor has a much larger resistance, it gets a bigger share of the voltage.
Exactly! To wrap up, the voltage drop across resistors in a series is dependent on their resistance values.
Introduction & Overview
Read summaries of the section's main ideas at different levels of detail.
Quick Overview
Standard
In series circuits, all resistors share the same current while the total voltage is the sum of the voltages across each resistor. The equivalent resistance in a series connection is the sum of individual resistances. Understanding this concept is key to analyzing how circuits function.
Detailed
In a series connection of resistors, the current that flows through each resistor is identical, maintaining a single path for the flow of electricity. This means that the total voltage across the circuit is equal to the sum of the voltages across each individual resistor, represented mathematically as V_total = V_1 + V_2 + ... + V_n. Moreover, the return path for current is also through the same path, leading to an equivalent resistance given by R_eq = R_1 + R_2 + ... + R_n. This behavior of current and voltage in series circuits is essential for understanding the overall behavior of electrical circuits.
Audio Book
Dive deep into the subject with an immersive audiobook experience.
Current in Series Circuits
Chapter 1 of 2
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
β Resistors R1,R2,β¦,Rn in series share the same current I. The total (equivalent) resistance is:
R_{eq} = R_1 + R_2 +
oads + R_n.
Detailed Explanation
In a series circuit, all resistors are connected one after the other, forming a single path for electric current to flow. This means that the same amount of electric current (I) passes through each resistor, regardless of its resistance. The total resistance of the circuit (R_eq) is simply the sum of the resistances of each individual resistor. So, if you have two resistors in series, R_1 and R_2, the total resistance is R_1 + R_2. This can be extended to any number of resistors, as shown in the formula.
Examples & Analogies
Think of resistors in series like a line of people passing a ball. The same ball (current) can only move at one pace (the same current) because it has to go through each person (resistor) one after the other. If one person in the line stops (a resistor) or becomes very slow (high resistance), the whole line must slow down (the current is reduced).
Voltage Across Each Resistor
Chapter 2 of 2
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
β The voltage across each resistor is V_i = I R_i, and the total voltage V_{total} = \\, β_i V_i.
Detailed Explanation
In a series circuit, the voltage across each resistor can be calculated using Ohm's Law, which states that voltage (V) is equal to the product of current (I) and resistance (R). For any given resistor R_i, the voltage drop across it will be V_i = I * R_i. The total voltage in the circuit is then the sum of the voltage drops across each resistor, or V_total = V_1 + V_2 + ... + V_n.
Examples & Analogies
Imagine a water system where multiple water tanks are lined up in a row. Each tank has a valve (resistor) that restricts water flow (current) to a certain extent. The pressure (voltage) at each tank depends on how much water is flowing through and how restrictive each valve is. The total pressure at the start (total voltage) has to overcome the sum of the restrictions (resistances) of all the tanks before it reaches the end.
Key Concepts
-
Series Connection: In a series connection, all components have the same current flowing through them.
-
Equivalent Resistance: Total resistance in a series circuit is the sum of individual resistances.
-
Voltage Division: Voltage across each resistor is proportional to its resistance.
Examples & Applications
In a series connection of a 2Ξ©, 3Ξ©, and 5Ξ© resistor, the total resistance, R_eq, is 10Ξ©.
In a series circuit with a 12V battery and resistors of 2Ξ© and 6Ξ©, the voltage across the 2Ξ© resistor is 3V.
Memory Aids
Interactive tools to help you remember key concepts
Rhymes
In series we see, the current's the same, but voltage's shared between the resistors in the game.
Stories
Imagine a road where all cars travel together, no need for stops until they change lanes β just like current in a series circuit!
Memory Tools
SR - Series Resistance equals the sum of all resistances.
Acronyms
C-V = Current is the Same, Voltage is divided in series.
Flash Cards
Glossary
- Series Connection
A circuit configuration where components are connected end-to-end, so the same current flows through each component.
- Equivalent Resistance
The total resistance of a series circuit calculated by summing the individual resistances.
- Voltage Drop
The reduction in voltage across a component in a circuit.
Reference links
Supplementary resources to enhance your learning experience.