Simple BJT Current Mirror - 12.3
Interactive Audio Lesson
Listen to a student-teacher conversation explaining the topic in a relatable way.
Configuration of the Current Mirror
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Today, we are exploring the configuration of a Simple BJT Current Mirror. Can anyone tell me how Q1 is configured in this circuit?
Isn't the collector of Q1 connected to its base to make it act like a diode?
Exactly! By shorting the collector to the base, we force Q1 into active region operation. This allows us to establish a reference current.
And how does the current flow from Q1 to Q2?
Good question! The output current from Q2 reflects the current through Q1 due to the shared base connection. This is crucial for mirroring the current accurately. Remember: VBE1 = VBE2!
Why is it important for the transistors to be matched?
Matching ensures that both transistors behave identically, which is essential for maintaining consistent output current. Let's summarize today's discussion: Q1 is diode-connected to set IREF, leading to IOUT being a mirror of that current in Q2.
Principles of Operation
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now let's discuss how the Simple BJT Current Mirror operates. What is the role of IREF in this configuration?
I believe IREF sets the current that Q2 will try to replicate?
Absolutely! Through RREF, we establish IREF, which determines the collector current of Q1; this in turn sets VBE across Q1 and Q2.
Are there any factors that could affect the output current?
Yes, variations in VBE and the base currents of both transistors do influence IOUT. The relationship is given as IOUT = IREF adjusted for base current losses.
So, is it fair to say that the output is not perfectly constant?
Exactly! You grasp the concept well. Therefore, it's key to recognize the output current may vary slightly due to these influences. For our summary, remember: IOUT closely mirrors IREF under ideal conditions, highlighting the purpose of the current mirror.
Limitations of Simple BJT Current Mirror
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Letβs delve into the limitations of our Simple BJT Current Mirror. What do you think could be significant drawbacks?
Could the transistor matching not be perfect?
Yes! The base current error arises when the transistors arenβt perfectly matched in their characteristics, which affects current mirroring accuracy.
And does the Early effect have an impact too?
Right again! The Early effect leads to a change in output current as the load voltage varies, which causes the ideal conditions to shift. Itβs crucial to account for these factors when using current mirrors in design.
So, what can we do to improve the design?
For improved performance, engineers look at configurations such as the Wilson or Widlar current mirrors. To close out this session, remember that while simple current mirrors provide compact designs, their limitations must be considered for application needs!
Introduction & Overview
Read summaries of the section's main ideas at different levels of detail.
Quick Overview
Standard
This section outlines the operation and design of a Simple BJT Current Mirror, emphasizing its configuration and importance in creating stable and predictable currents in circuits. Key performance metrics, limitations, and the design approach necessary for constructing the circuit are also covered.
Detailed
Simple BJT Current Mirror
The Simple BJT Current Mirror is a circuit designed to mirror a specific current through one transistor (Q1) to another (Q2), both made from matched bipolar junction transistors (BJTs). The basic goal of the current mirror is to provide a stable and predictable output current (IOUT) that mirrors a reference current (IREF).
Circuit Configuration
- Q1 Configuration: The first transistor (Q1) operates as a diode with its collector shorted to its base, ensuring it operates in the active region.
- Reference Current (IREF): This current flows through Q1 and is determined by an external reference resistor (RREF) connected between a voltage source (V) and the collector of Q1.
- Base Connection: The bases of Q1 and Q2 are connected; therefore, they experience the same base-emitter voltage (VBE).
- Collector of Q2: The output current is supplied from the collector of Q2, making it dependent upon the VBE during active conditions.
Principle of Operation
- Establishing IREF: When a current flows through RREF, it produces a VBE across Q1, generating a mirroring effect onto Q2 since both transistors share the base connection. Therefore, ideally, IOUT equals IREF.
- Output Current Calculation: Yet, due to base current losses, IOUT often slightly deviates from IREF, expressed as IOUT = (1 + 2/Ξ²)IREF (where Ξ² represents current gain).
Limitations
- Base Current Error: The presence of base currents in both transistors diminishes the reliable current matching, especially if Ξ² is low.
- Early Effect: Changes in collector-emitter voltage (VCE) can also affect IOUT due to the transistor's characteristics where IOUT may vary slightly due to modulation of the base width. Thus, the mirror's performance varies with load conditions.
The Simple BJT Current Mirror is often compared with more advanced configurations such as the Wilson and Widlar current mirrors, which enhance current matching accuracy and output resistance.
Audio Book
Dive deep into the subject with an immersive audiobook experience.
Configuration of Simple BJT Current Mirror
Chapter 1 of 3
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
A simple BJT current mirror consists of two matched NPN (or PNP) transistors, Q1 and Q2.
- Q1 is configured as a diode: its collector is shorted to its base. This forces Q1 into active region operation (or saturation if base current is too high, but usually active).
- A reference current (IREF) flows into the collector of Q1. This current is set by a voltage source (VCC) and a reference resistor (RREF).
- The base of Q1 is connected to the base of Q2. Since the transistors are matched, VBE1 = VBE2.
- The emitters of both Q1 and Q2 are connected to ground.
- The output current (IOUT) is taken from the collector of Q2, flowing into a load.
Detailed Explanation
In a simple BJT current mirror, we use two identical bipolar junction transistors (BJTs) that are closely matched for their electrical characteristics. The configuration involves shorting the collector of the first transistor (Q1) to its base, which forces it to operate in the active region. When a reference current (IREF) passes through Q1, a corresponding collector current flows through Q2 due to the equal base-emitter voltages (VBE1 and VBE2) created by the identical transistors. Because of this connection, when Q1 conducts a certain current, Q2 will ideally mirror that current, providing an output current (IOUT) that matches IREF. This setup is vital for many analog circuits where stable currents are necessary.
Examples & Analogies
Think of this circuit as a pair of identical twins where one twin (Q1) is following a strict diet (IREF) and the other twin (Q2) tries to mirror the first twin's diet. If the first twin eats a certain number of calories (IREF), the second twin will ideally consume the same number of calories, ensuring that both maintain their health through matching dietary intakes.
Principle of Operation
Chapter 2 of 3
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
- The reference current IREF flows through Q1, establishing a VBE1 across its base-emitter junction.
- Since Q1 and Q2 are matched and their bases are tied together (and emitters grounded), VBE1 = VBE2.
- Because VBE2 = VBE1, the collector current of Q2 (IC2 or IOUT) will ideally be equal to the collector current of Q1 (IC1). IREF = IC1 + 2IB (approximately, ignoring diode current of Q1 base-collector junction) IOUT = IC2 Ideally, IOUT = IC1 β IREF.
Setting the Reference Current (IREF): IREF = RREF VCC β VBE1.
Detailed Explanation
The operation of the simple BJT current mirror relies on the relationship between the reference current (IREF) passing through Q1 and the output current (IOUT) from Q2. When IREF flows through Q1, it creates a voltage across the base-emitter junction (VBE1). Due to the closeness in construction and characteristics, VBE2 for Q2 will match VBE1, ensuring that both transistors operate similarly. Since Q2's collector current (IC2) mirrors Q1's collector current (IC1), we can expect IOUT to follow IREF closely. To establish IREF, we can calculate it using the voltage across the reference resistor (RREF) and supply voltage (VCC), minus the base-emitter voltage of Q1 (VBE1). This calculus is essential for accurate current mirroring.
Examples & Analogies
Imagine a teacher who sets an assignment for one student (Q1) and expects that student to communicate the same assignment to a second student (Q2). If the first student understands and completes the assignment correctly (representing IREF), the second student, who hears the same instructions, should also ideally reproduce that same work. The setup ensures that any adjustments to the assignment made by the teacher will be reflected equally by both students, giving a predictable outcome.
Limitations of Simple Current Mirror
Chapter 3 of 3
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
- Base Current Error: A portion of IREF is consumed by the base currents of Q1 and Q2. IREF = IC1 + IB1 + IB2 β IC1 + Ξ²IC1 + Ξ²IC2. If IC1 = IC2 = IC, then IREF = IC (1 + 2/Ξ²). So, IOUT = IC = (1 + 2/Ξ²)IREF. The output current is actually slightly less than IREF. This error is significant if Ξ² is low.
- Early Effect: As the collector-emitter voltage of Q2 (VCE2) changes (due to varying load resistance), its collector current (IC2) will change slightly due to the Early effect (base width modulation). This means the output current is not perfectly constant, and the output resistance is limited. The output resistance Rout of the simple current mirror is approximately the output resistance of the transistor itself, ro = IC VA + VCE, where VA is the Early voltage.
Detailed Explanation
Although the simple BJT current mirror is effective, it has limitations. One key limitation is base current error: both Q1 and Q2 absorb some of the current intended to flow through them due to their base currents. This means that IOUT, which we want to mirror as close as possible to IREF, ends up being slightly less than IREF. The error is particularly pronounced when the current gain (Ξ²) of the transistors is low. Additionally, we may encounter the Early effect, where changes in the voltage across Q2 affect its collector current due to the base width modulation, leading to variations in output current depending on load conditions. This behavior limits the current mirror's performance in applications requiring stable current sources.
Examples & Analogies
Think of a simple current mirror like a relay race where the first runner (Q1) passes a baton (IREF) to the second runner (Q2). If the first runner uses some energy to speed up (base current error), less energy reaches the second runner, affecting their speed (output current). Sometimes the runners are affected by external factors like uneven terrain (Early effect), which can cause them to slow down or speed up unexpectedly, disrupting the race's rhythm. This signifies that while they intend to mirror each other's speed accurately, external influences and internal losses can derail that goal.
Key Concepts
-
Current Mirror: A circuit configuration that replicates a specified current from one device to another.
-
BJT Configuration: BJTs in the current mirror are configured with their collector shorted to their base for current mirroring.
-
Reference Current: IREF sets the current that is mirrored by the current mirror.
-
Early Effect: A phenomenon that affects the output current based on collector-emitter voltages.
Examples & Applications
In a simple BJT current mirror setup, if IREF is established at 1mA, logically, IOUT from Q2 should also strive to replicate this value under ideal circumstances.
When designing a current mirror, engineers must ensure that resistors used to define IREF are accurately calculated to minimize errors due to base current.
Memory Aids
Interactive tools to help you remember key concepts
Rhymes
In a mirror not too far, Q1 sets the reference star. Q2 follows close, that's the show, together they make currents flow.
Stories
Imagine two twin brothers where one (Q1) always dresses the same as the other (Q2). When Q1 gets his allowance (current IREF), Q2 gets the same amount to replicate those spending habits, leading to a perfect mirroring.
Memory Tools
MIRROR: Match IREF, Reflect Output, Remember the base currents affect results.
Acronyms
BETA
Base excess currents affect the transistors
thereby affecting the output current.
Flash Cards
Glossary
- BJT
Bipolar Junction Transistor; a type of transistor that uses both electron and hole charge carriers.
- IREF
Reference Current; the current flowing through the reference resistor that sets the output current in a current mirror.
- IOUT
Output Current; the current provided by the current mirror, ideally equal to IREF.
- VBE
Base-Emitter Voltage; the voltage across the base-emitter junction of a BJT, critical in establishing current flow.
- Early Effect
A phenomenon in BJTs where the collector current increases with collector-emitter voltage due to a decrease in base width.
Reference links
Supplementary resources to enhance your learning experience.