Numerical Example - 6.3.2.6
Interactive Audio Lesson
Listen to a student-teacher conversation explaining the topic in a relatable way.
Understanding Oscillator Design Basics
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Welcome class! Today, we will discuss how to design a phase shift oscillator. What do you all know about oscillators?
I know that oscillators generate repetitive signals like sine waves!
And they need components like amplifiers and feedback networks, right?
Exactly! An oscillator has an amplifier for gain and a feedback network to sustain oscillations. Can anyone tell me how we can determine the frequency of oscillation?
We can use the formula involving resistance and capacitance, right?
Yes, you are correct! We can calculate the frequency using the formula f0 = 1 / (2ΟRCβ6). Today, we'll put this to practice with a numerical example.
Calculating Resistor Values
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now, letβs move to the calculations. We want our oscillator to operate at 1 kHz using a capacitor of 10 nF. Can anyone help me out by writing the equation?
Sure! R = 1 / (2Οf0Cβ6).
Great! Now letβs substitute the values into that equation. What do we get for R?
If we put f0 = 1000 Hz and C = 10 Γ 10^-9 F, then R is approximately 6497 ohms!
Exactly! Now, remember, we often need to select a standard resistor value. What would we choose?
We would go for 6.8 kβ¦, which is a standard resistor value.
Perfect! Remember, choosing standard values is critical in practical designs.
Op-Amp Gain Configuration
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now, let's discuss the amplifier's gain. For our oscillator, we need a gain of at least 29. Who can remind us how to find the gain of an op-amp circuit?
The gain is calculated using the feedback resistor Rf and the input resistor Rin, right?
Exactly! So if we choose Rin = 1 kβ¦, how much should Rf be?
Rf should be greater than or equal to 29 kβ¦.
Correct! This ensures we meet the gain condition for sustained oscillation. Letβs summarize our calculations!
Introduction & Overview
Read summaries of the section's main ideas at different levels of detail.
Quick Overview
Standard
The section illustrates the design process for creating a phase shift oscillator intended for a frequency of 1 kHz with a capacitor value of 10 nF. It involves calculating the necessary resistor value and selecting standard resistor values to meet design requirements.
Detailed
Numerical Example of Phase Shift Oscillator Design
In this section, we will design a phase shift oscillator using an operational amplifier to achieve a target oscillation frequency of 1 kHz. The chosen capacitor value is 10 nF. Using the formula derived for the oscillation frequency in a three-section RC phase shift network, we identify the required resistor value.
Calculation Steps
Given:
- Frequency (f0) = 1 kHz
- Capacitor (C) = 10 nF = 10 Γ 10^-9 F
Using the formula for the oscillation frequency,
$$f_0 = rac{1}{2\pi RC\sqrt{6}}$$
We rearrange it to solve for R:
$$R = rac{1}{2\pi f_0 C \sqrt{6}}$$
Upon substituting the known values:
$$R = \frac{1}{2\pi(1000)(10 \times 10^{-9})\sqrt{6}} \approx 6497 \Omega$$
Standard Resistor Value Selection
In practical applications, we select the nearest standard resistor value available, which is 6.8 kβ¦.
Gain Configuration for the Op-Amp
To ensure that the op-amp provides the desired gain for oscillation, the inverting gain should satisfy the condition |Av| β₯ 29. If we choose a feedback resistor Rin of 1 kβ¦, then,
- To find Rf, we have:
$$|A_v| = R_f / R_{in}
ightarrow R_f β₯ 29kβ¦$$
This setup ensures the design meets the oscillation and feedback requirements for the phase shift oscillator.
Audio Book
Dive deep into the subject with an immersive audiobook experience.
Phase Shift Oscillator Design
Chapter 1 of 2
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
Design a phase shift oscillator using an op-amp for f_0=1textkHz. Let C=10textnF.
R=\frac{1}{2\pi f_0 C\sqrt{6}}=\frac{1}{2\pi\times1000text{Hz}\times10\times10^{-9}text{F}\times\sqrt{6}}
R=\frac{1}{6.283\times10^{-5}\times2.449}text{Ohm}=\frac{1}{1.539\times10^{-4}}text{Ohm} \approx 6497text{Ohm}.
Detailed Explanation
Here, we're tasked with designing a phase shift oscillator to operate at a frequency of 1 kHz using a capacitor of 10 nF. First, we calculate the required resistor value using the formula derived from the oscillator's operational principles. The formula shows that the resistance (R) can be calculated based on the desired frequency and capacitance, incorporating the square root of 6 to account for the number of RC sections in the oscillator. After substituting the values into the formula and simplifying, we find that the calculated resistance is approximately 6497 ohms. To fit standard resistor values, we choose a resistor of 6.8 kΞ©, which is the closest standard value.
Examples & Analogies
Imagine that you're setting the perfect speed for a carousel at a fair. If you want the carousel to spin at a certain speed (like our desired frequency of 1 kHz), you have to choose the right combination of gears ( resistors in our circuit). Just as you measure and adjust the gear sizes based on the desired speed of the carousel, we calculate resistor values for our oscillator to achieve the right frequency.
Op-Amp Configuration
Chapter 2 of 2
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
Use standard resistor value R=6.8text{k}Omega. The op-amp should be configured for an inverting gain of at least 29. If using feedback resistors R_f and R_in (for the op-amp input), A_v=\frac{R_f}{R_in}. So, R_f \geq 29text{k}Omega. If R_in=1text{k}Omega, then R_f \geq 29text{k}Omega.
Detailed Explanation
Next, we need to set up the operational amplifier (op-amp) for our phase shift oscillator. The gain of the op-amp must be at least 29 to counter the attenuation introduced by the three-section RC network. Using the standard resistor value of 6.8 kΞ© for the feedback resistor allows us to calculate the required input resistor. The gain in an op-amp is determined by the ratio of the feedback resistor to the input resistor. By assuming an input resistor value of 1 kΞ©, we determine that our feedback resistor must be at least 29 kΞ© to provide the necessary gain.
Examples & Analogies
You can think of the op-amp as a party planner trying to ensure enough energy at a party. The op-amp needs a certain number of guests (current) to create an exciting atmosphere. Setting the right ratio of guests to snacks (resistor values) ensures the energy level stays high enough throughout the event. In this case, choosing an appropriate gain and corresponding resistor values ensures the 'party energy' (oscillation) continues to thrive.
Key Concepts
-
Phase Shift Oscillator Design: The process of calculating resistance and capacitance values to achieve a desired frequency.
-
Barkhausen Criterion: A fundamental rule for ensuring sustained oscillations in electronic circuits.
-
Standard Components Usage: The practice of selecting available resistor values for practical circuit designs.
Examples & Applications
Design a phase shift oscillator for an operation frequency of 1 kHz using a 10 nF capacitor and select a standard resistor value.
Calculate the gain for an op-amp configured for a phase shift oscillator with a feedback resistor.
Illustrate how to derive the necessary resistor from the oscillator's frequency and capacitor values.
Memory Aids
Interactive tools to help you remember key concepts
Rhymes
For oscillations to remain, you need R and C to sustain!
Stories
Imagine a clock where the hands need to turn at precise intervals; each gear is like an R and C working together to keep the time flowing.
Memory Tools
FOG (Frequency, Oscillator, Gain) - to remember the key terms associated with oscillator design!
Acronyms
FRC (Frequency, Resistance, Capacitance) - helps recall the components essential for determining the oscillator design.
Flash Cards
Glossary
- Phase Shift Oscillator
An electronic circuit that uses resistors and capacitors to achieve a specific phase shift for oscillation.
- Barkhausen Criterion
The condition that must be fulfilled for an oscillator to produce sustained oscillations, involving phase and gain criteria.
- Standard Resistor Value
A commercially available resistor value that designers can use in circuits.
Reference links
Supplementary resources to enhance your learning experience.