Practice Construction Methods And Equipment Management (1) - Construction Methods and Equipment Management

Practice: Construction Methods and Equipment Management

Lesson 1Construction Methods and Equipment Management

Practise this section

8 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
2 questions · about 1 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What is the primary difference between on-highway and off-highway trucks?
Show hintHide hint
Consider where each type of truck can operate.
Question 2.
Name one type of dumping method for trucks.
Show hintHide hint
Think about how where the material is released.
3Question 3.
What distinguishes an off-highway truck from an on-highway truck?
- Off-highway trucks can carry more weight.
- On-highway trucks are limited in size.
- Off-highway trucks cannot be used on public roads.
Show hintHide hint
Think about the legal restrictions based on truck specifications.
4Question 4.
True or False: A bottom dump truck can unload while moving.
- True
- False
Show hintHide hint
Consider the efficiency advantages of this design.
Question 5.
A construction site employs a truck that can carry 30 cubic yards of material. If the loader bucket can only carry 5 cubic yards, how many full buckets are needed to load the truck? If two buckets are only filled to 4 cubic yards each, what is the truck's load?
Show hintHide hint
Break down the problem into two parts: finding full bucket loads and considering short loads.
Question 6.
Discuss how different terrains affect the choice between using an articulated truck and a rigid frame truck.
Show hintHide hint
Think about the advantages of flexibility in difficult conditions.

4 more questions in this section. Enroll free to practise them all.