Practice Safe Working Load For A Mobile Crane (2.4) - Construction Methods and Equipment Management

Practice: Safe Working Load for a Mobile Crane

Lesson 2.4Construction Methods and Equipment Management

Practise this section

10 questions

Flashcard drill
4 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
4 questions · about 3 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does SWL stand for?
Show hintHide hint
Think about the load limit of a crane.
Question 2.
What contributes to the overturning moment?
Show hintHide hint
Consider all loads and forces acting on the crane.
3Question 3.
What does SWL stand for?
- Safe Working Load
- Standard Weight Limit
- Structural Working Load
Show hintHide hint
It's a term widely used in lifting operations.
4Question 4.
True or False: The stabilizing moment must exceed the overturning moment for crane safety.
- True
- False
Show hintHide hint
Consider the balance required for stability.
Question 5.
A crane is set to lift two loads: one load of 8 tons is lifted at a radius of 4 meters, while a boom weighing 1.5 tons is also attached. Calculate the total overturning moment acting on the crane. What would you suggest to ensure stability?
Show hintHide hint
Consider how to balance loads.
Question 6.
During an operation, a crane experiences a gust of wind that applies an additional load of 2 tons while lifting a load of 10 tons at a distance of 5 meters from the fulcrum. What effect does this have on both the overturning and stabilizing moments? Calculate.
Show hintHide hint
Can you quantify the changes caused by wind load?

6 more questions in this section. Enroll free to practise them all.