9.7 - Junction Transistor (BJT)
Enroll to start learning
You’ve not yet enrolled in this course. Please enroll for free to listen to audio lessons, classroom podcasts and take practice test.
Interactive Audio Lesson
Listen to a student-teacher conversation explaining the topic in a relatable way.
Introduction to Junction Transistor
🔒 Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Today, we’re going to explore Junction Transistors, specifically Bipolar Junction Transistors or BJTs. Can anyone tell me what the components of a BJT are?
There are three regions: the Emitter, Base, and Collector.
That's right! The Emitter injects carriers, the Base controls the flow, and the Collector collects the carriers. Remember, EBC stands for Emitter, Base, Collector.
What types of BJTs are there?
Great question! There are two main types: n-p-n and p-n-p transistors. Each varies in doping types and functionalities.
Working Principle of BJTs
🔒 Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Let's discuss how BJTs work. The base current controls the larger collector-emitter current. Can someone explain how these currents relate?
Is it true that the collector current is equal to beta times the base current?
Exactly! The relationship is \( I_C = \beta I_B \). Beta, or current gain, is a crucial aspect of BJTs.
How do we define the emitter current?
The emitter current, \(I_E\), can be defined as the sum of the base and collector currents: \(I_E = I_B + I_C\).
Modes of Operation
🔒 Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now, let’s look into the modes of operation of transistors. Can anyone name the three modes?
I think it’s active, cut-off, and saturation.
That's correct! In the active mode, the transistor amplifies signals. In cut-off, it behaves like an open switch, and in saturation, it acts like a closed switch.
How do we know when it's in active mode?
In active mode, the emitter-base junction is forward-biased and the collector-base junction is reverse-biased.
Applications of BJTs
🔒 Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Finally, let’s examine applications of BJTs. Can anyone mention where we might find them?
In amplifiers, like in audio systems!
Absolutely! They’re also used in digital logic circuits and switches. Remember, they control large currents efficiently.
So, they are essential in very many devices?
Exactly! BJTs are foundational in electronic devices. They help us enhance and control signals effectively.
Introduction & Overview
Read summaries of the section's main ideas at different levels of detail.
Quick Overview
Standard
Junction transistors, comprised of three regions (Emitter, Base, and Collector), can operate in three modes: active, cut-off, and saturation. They play crucial roles in amplifying signals and serving as switches in numerous electronic devices, with a current gain factor denoted as beta (β).
Detailed
Junction Transistor (BJT)
A Bipolar Junction Transistor (BJT) is a type of transistor that consists of three layers of semiconductor material, which are called the Emitter (E), Base (B), and Collector (C). These layers are doped to create two types of transistors: n-p-n and p-n-p, which differ in their arrangement of n-type and p-type semiconductors.
Structure
- Emitter: Heavily doped region that injects carriers (electrons or holes).
- Base: Thin and lightly doped region, controlling the flow of carriers.
- Collector: Region that collects the carriers from the emitter.
Working Principle
The transistor operates on the principle of using a small input current at the base to control a larger current flowing from the emitter to the collector.
Modes of Operation
- Active: The emitter-base junction is forward-biased, and the collector-base junction is reverse-biased, allowing the transistor to amplify signals.
- Cut-off: Both junctions are reverse-biased, resulting in no current flow and effectively turning the transistor off.
- Saturation: Both junctions are forward-biased, allowing maximum current flow, acting as a switch in the ON state.
Current Relation
The relation between the currents in a BJT is expressed as:
\[ I_C = \beta I_B \quad \text{and} \quad I_E = I_B + I_C \]\
Where:
- \(I_C\) is the collector current,
- \(I_B\) is the base current,
- \(I_E\) is the emitter current,
- \(\beta\) is the current gain, typically between 20 and 200.
BJTs are widely used in various applications, including amplifiers, oscillators, and digital circuits due to their ability to control large currents with small input signals.
Audio Book
Dive deep into the subject with an immersive audiobook experience.
Structure of BJT
Chapter 1 of 4
🔒 Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
• Consists of three regions: Emitter (E), Base (B), Collector (C).
• Two types: n-p-n and p-n-p transistors.
Detailed Explanation
The Junction Transistor (BJT) is a semiconductor device that consists of three regions: the emitter, base, and collector. The emitter is responsible for injecting charge carriers (either electrons or holes) into the base. The base is a thin and lightly doped layer that facilitates the movement of charges. Lastly, the collector draws the carriers from the base to contribute to the output current. There are two configurations of BJTs: n-p-n, where the majority carriers are electrons, and p-n-p, where the majority carriers are holes.
Examples & Analogies
You can think of the BJT as a water faucet system. The emitter is the pipe that supplies water (electrons), the base is the narrow opening that allows some of the water to flow through but not all, and the collector is where the water finally exits into the larger pipe (the load). Depending on the type of pipe system (n-p-n or p-n-p), the flow will differ as per the design.
Working Principle of BJT
Chapter 2 of 4
🔒 Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
• The emitter injects carriers.
• The base is thin and lightly doped.
• The collector collects the carriers.
Detailed Explanation
The working principle of a BJT revolves around its ability to control the flow of current through the three regions by using a small input current (to the base). When the emitter injects carriers into the base, some of these carriers recombine with holes in the base, while the remaining carriers cross into the collector region. The thinness and low doping of the base allow most of the carriers to pass through, thereby amplifying the current.
Examples & Analogies
Imagine the BJT as a busy highway. The cars (electrons) from one side (the emitter) are trying to reach the other side (the collector). The base acts like a toll booth that allows some cars to pass through based on the rules of the traffic (the small input current). Those that are let through then zoom into a larger highway (the collector), increasing the overall traffic flow.
Modes of Operation
Chapter 3 of 4
🔒 Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
• Active: Emitter-base forward biased, collector-base reverse biased.
• Cut-off: Both junctions reverse biased.
• Saturation: Both junctions forward biased.
Detailed Explanation
BJTs can operate in three modes based on the biasing of the junctions. In the active mode, the emitter-base junction is forward biased (allowing current flow) while the collector-base junction is reverse biased (preparing to collect carriers). In the cut-off mode, both junctions are reverse biased, which means the transistor is off and no current flows. In saturation mode, both junctions are forward biased, allowing maximum current to flow through.
Examples & Analogies
Think of the BJT operation like a light switch. In the active mode, the switch is partially turned on, allowing a little current to flow (the light is dimmed). In cut-off, the switch is completely off, and no electricity flows (the light is off). In saturation, the switch is fully on, and current flows freely (the light is bright).
Current Relationship in BJT
Chapter 4 of 4
🔒 Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
𝐼 = 𝛽𝐼 and 𝐼 = 𝐼 +𝐼
𝐶 𝐵 𝐸 𝐵 𝐶
Where:
• 𝐼 = collector current
𝐶
• 𝐼 = base current
𝐵
• 𝐼 = emitter current
𝐸
• 𝛽 = current gain (typically 20–200)
Detailed Explanation
The relationship between the currents in a BJT is defined by two equations. The collector current (I_C) is related to the base current (I_B) by the current gain (β), which indicates how effectively the transistor can amplify current. Additionally, the sum of the base current and the collector current equal the emitter current (I_E). Thus, understanding these relationships helps in designing circuits that utilize BJTs for amplification.
Examples & Analogies
You can think of current gain (β) in a BJT like a crowdfunding campaign. Imagine each individual donation (base current) leads to a much larger total amount raised (collector current). Just as one small contribution can lead to a major project, a small base current can lead to a much larger collector current, making BJTs powerful tools in electronic circuits.
Key Concepts
-
Emitter: The part of the transistor that injects carriers for current flow.
-
Base: The thin region that controls the flow of carriers and allows for amplification.
-
Collector: The area where carriers are collected, forming the output current.
-
Modes of Operation: BJTs operate in active, cut-off, and saturation modes.
Examples & Applications
An example of a BJT in a common emitter configuration used in an audio amplifier.
Using a BJT as a switch in a simple LED circuit, where the transistor toggles the LED on and off.
Memory Aids
Interactive tools to help you remember key concepts
Rhymes
Emitter gives, Base controls, Collector's where the current rolls.
Stories
Imagine a water fountain. The Emitter is the pump, pushing water (current) into the fountain (Base), while the Collector is the basin collecting the overflow.
Memory Tools
EBC - Eager Bystander Collector helps remember the order of transistor regions.
Acronyms
BJT stands for Bipolar Junction Transistor, which uses both types of charge carriers.
Flash Cards
Glossary
- Bipolar Junction Transistor (BJT)
A type of transistor that uses both electron and hole charge carriers.
- Emitter
The region of the transistor that injects carriers into the base.
- Base
The thin, lightly doped region of the transistor that controls the flow of carriers.
- Collector
The region of the transistor that collects the carriers from the emitter.
- Current Gain (β)
The ratio of collector current to base current in a transistor.
- Active Mode
Transistor mode in which it amplifies signals.
- Cutoff Mode
Transistor mode in which no current flows.
- Saturation Mode
Transistor mode in which maximum current flows, acting as a switch.
Reference links
Supplementary resources to enhance your learning experience.