Enrol to start learning
Reading is open to everyone. Enrolling is free, and it is what unlocks the audio lessons, practice tests and progress tracking.
1. Stereolithography (SLA)
This section
Practice test
11 questions on this section. Wrong answers show you what to read again.
Sign up to take itWhole chapter
Revision test
Mixed questions from across the chapter. Your answers get marked.
Sign up to take itQuick
Flashcard drill
2 cards from this lesson. Good the night before a test.
Try these first
- 1.
What is Stereolithography (SLA)?
Hint
Think about how objects are built up in layers.
- 2.
Name one advantage of using SLA.
Hint
Consider the finish on the objects produced.
- 3.
What technology does Stereolithography primarily use to create 3D objects?
- UV light
- Infrared heat
- Sound waves
Hint
Remember the process of curing resin.
- 4.
True or False: SLA requires post-processing after printing.
- True
- False
Hint
Consider what happens after the object comes out of the printer.
- 5.
Evaluate the cost-effectiveness of using SLA for large-scale production versus traditional manufacturing methods.
Hint
Consider both initial setup and material costs when comparing methods.
- 6.
Analyze the impact of using thinner layers on print time versus surface complexity achieved in SLA.
Hint
Think about the trade-offs between quality and manufacturing time.
Exercises
Total Questions
2
Estimated Time
4 min
Passing Score
70%
Instructions
- Read each question carefully
- You can use hints if you need help
- Complete all questions before submitting
4 more questions available
Enrol freeQuiz
Total Questions
2
Estimated Time
4 min
Passing Score
70%
Instructions
- Read each question carefully
- You can use hints if you need help
- Complete all questions before submitting
1 more question available
Enrol freeChallenge Problems
Total Questions
2
Estimated Time
4 min
Passing Score
70%
Instructions
- Read each question carefully
- You can use hints if you need help
- Complete all questions before submitting