Common-Mode Gain (A_cm)
Interactive Audio Lesson
Listen to a student-teacher conversation explaining the topic in a relatable way.
Introduction to Common-Mode Gain
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Today, we are focusing on the common-mode gain, or A_cm, in differential amplifiers. Can anyone explain what we mean by common-mode input signals?
I think common-mode signals are when both inputs of the amplifier receive the same voltage.
Exactly, that's right! So when both inputs, say V_in1 and V_in2, are equal, we are testing how well the amplifier ignores these signals. This helps us understand its ability to reject noise.
What is considered a perfect rejection for A_cm?
Ideally, A_cm should be zero. This indicates that any common-mode signal doesnβt affect the output. Remember the acronym 'NOISE' β means we want to 'Not Observe Input Signal Effects'!
Calculating Common-Mode Gain
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Let's dive deeper into calculating A_cm. The formula we use is A_cm = - (R_C / (2 * R_E')). Who can tell me what R_E' means?
I believe R_E' is the effective resistance seen at the common-emitter point, right?
Correct! So if we use a dedicated BJT current source, R_E' will be quite high, ideally enhancing our common-mode rejection. Does anyone see a potential drawback?
It seems like having a high R_E' might complicate things if the component values aren't precise.
Great observation! Component mismatches can lead to a non-zero common-mode gain, affecting the amplifier's performance.
Common-Mode Gain in Practical Situations
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now, letβs discuss why we often observe a small A_cm in real-world applications. What factors could contribute to this?
Maybe it's due to the mismatch in transistor parameters?
Yes! Differences in transistor characteristics, biasing issues, or even component tolerances can lead to variations. This reinforces the need for precision.
So having a low A_cm is vital to improve our Common-Mode Rejection Ratio, right?
Exactly! A high CMRR leads to better performance in noisy environments. To help you remember this, think of CMRR as 'Commonly Minimizing Rejected Response'.
Introduction & Overview
Read summaries of the section's main ideas at different levels of detail.
Quick Overview
Standard
The common-mode gain (A_cm) for a differential amplifier quantifies the additional output signal produced when both inputs receive the same voltage. It ideally should be zero, representing perfect rejection of common-mode signals, but practical circuits exhibit a small output due to nonlinearities and component mismatches.
Detailed
Common-Mode Gain (A_cm)
The common-mode gain, denoted as A_cm, is a crucial parameter in understanding the performance of a differential amplifier. When both input signals of the differential amplifier are identical (V_in1 = V_in2 = V_ic), an ideal amplifier would output no signal. This scenario indicates perfect common-mode rejection, which is pivotal for applications where noise can interfere with the desired signal. In most practical scenarios, however, common-mode gain is non-zero due to various factors like transistor imperfections and circuit design limitations.
Mathematically, A_cm can be expressed as:
A_cm = - (R_C / (2 * R_E'))
Here, R_C represents the collector resistor, and R_E' indicates the effective resistance at the common-emitter node. The ideal behavior of A_cm should approach zero, but real-world values reflect inherent imperfections within the design. In performance evaluations, achieving a low common-mode gain is instrumental in ensuring high common-mode rejection ratios (CMRR), which further enhance the signal integrity in differential amplifiers.
Audio Book
Dive deep into the subject with an immersive audiobook experience.
Understanding Common-Mode Gain
Chapter 1 of 4
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
β When a pure common-mode input signal (V_in1=V_in2=V_ic) is applied, the amplifier ideally produces no output. In a real amplifier, there is a small output due to imperfections.
Detailed Explanation
Common-mode gain (A_cm) measures the ability of an amplifier to handle signals that are the same on both inputs. In an ideal differential amplifier, when both inputs receive the same voltage (common-mode input), the amplifier would produce no output, meaning it perfectly rejects these signals. However, due to various imperfections in real-world amplifiers, a small output is produced, which is referred to as the common-mode gain.
Examples & Analogies
Imagine you're at a concert with a friend. If both of you hear the same music playing at equal volume (common-mode input), ideally, you wouldnβt notice a difference in the experience. However, if one speaker is slightly louder than the other, you might perceive a small shift in sound despite the similar inputs, representing the small, unintended output typical of common-mode gain.
Mathematical Representation of A_cm
Chapter 2 of 4
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
β For a differential amplifier with a current source approximated by a large emitter resistor R_E:
A_cm=\frac{V_{out1}}{V_{ic}}=β\frac{R_C}{2R_E'}
Where R_E' is the effective resistance seen at the common emitter point. If a BJT current source is used, R_E' represents the output resistance of the current source (which is typically very high). If a simple large resistor R_E is used, then R_E'=R_E.
Detailed Explanation
The formula for common-mode gain (A_cm) is derived from the relationship between the output voltage for a common-mode input and the input voltage. Here, R_C is the collector resistor, while R_E' is the resistance looking into the emitter. If a high-quality current source is used, R_E' can be very large, leading to a very small value for A_cm, which is desired. If a simple resistor is used instead, this effective resistance is simply the value of the resistor R_E.
Examples & Analogies
Think of R_E and R_E' as barriers in a garden. A tall, carefully planted hedge (high-quality current source) allows almost all light (signal) to pass through without spreading to the sides (common-mode signal). On the other hand, a low fence (simple resistor) lets some light spill over through the gaps, causing unwanted growth (output) in areas you donβt want.
Ideal vs Real-World Expectations
Chapter 3 of 4
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
β Ideally, for a perfect common-mode rejection, A_cm should be zero.
Detailed Explanation
The goal of designing good differential amplifiers is to achieve zero common-mode gain (A_cm = 0). This means that if the same signal is applied to both inputs, it should not affect the output at all. Practically, achieving this is challenging due to non-ideal characteristics in components like transistors, which can lead to some level of common-mode gainβeven if it's small.
Examples & Analogies
Consider a team of athletes training for synchronized swimming. If they perform perfectly in sync (A_cm = 0), they create a stunning performance. However, if one swimmer is slightly out of sync (common-mode gain), it becomes noticeable, affecting the teamβs overall performance. Engineers strive for that synchronized perfection in differential amplifiers!
Numerical Example of Common-Mode Gain
Chapter 4 of 4
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
β Numerical Example (Common-Mode Gain):
Assume the same differential amplifier with R_C=4.7kΞ©. The common current source is approximated by a resistor R_E=100kΞ© to a negative supply.
A_cm=β\frac{4.7kΞ©}{2}Γ100kΞ©=β\frac{4.7}{200}=β0.0235 (very small, as desired).
Detailed Explanation
In this example, by assuming specific resistor values and applying them to the A_cm formula, we get a very small common-mode gain of -0.0235. This is close to zero, indicating that the amplifier is effectively rejecting the common-mode signal, which is a desired characteristic for high-performance differential amplifiers.
Examples & Analogies
Imagine measuring the noise level in a library. If everyone whispers (common-mode input), the overall noise level should ideally remain at zero (perfect rejection). The calculated common-mode gain, in this case, shows that only a small whisper is leaking through (A_cm = -0.0235), which youβd ideally want in a quiet environment.
Key Concepts
-
Common-Mode Gain (A_cm): A measure of the differential amplifier's output when both inputs are identical.
-
Common Mode Rejection Ratio (CMRR): Indicates the effectiveness of the amplifier in ignoring noise common to both inputs.
-
Effective Resistance (R_E'): A critical factor influencing the common-mode gain when approximated with resistors.
Examples & Applications
In a differential amplifier with R_C at 4.7 kΞ© and an approximate resistor R_E of 100 kΞ©, the calculated A_cm could suggest high performance due to a small outputβidentifying low common-mode gain.
If a differential amplifier outputs 5 mV under common-mode input versus 1000 mV under differential input, it indicates a high CMRR, successfully rejecting almost all common signals.
Memory Aids
Interactive tools to help you remember key concepts
Rhymes
In circuits we design with care, / Common-mode signals are a snare. / Low A_cm keeps the noise away, / Let's keep the bad signals at bay!
Stories
Imagine two friends talking in a noisy cafΓ©. If both speak the same (common-mode), ideally no one should hear them if the cafΓ© is quiet, showing perfect rejection.
Memory Tools
Remember 'NICE' - Non-ideal Input Common factors cause Errors β to recall common causes for non-zero A_cm.
Acronyms
CROSS - Common signals Reduced, Output Strongly Stable.
Flash Cards
Glossary
- CommonMode Gain (A_cm)
The output voltage of a differential amplifier when both inputs are at the same voltage level.
- Common Mode Rejection Ratio (CMRR)
A measure of a differential amplifier's ability to reject common-mode signals, expressed as the ratio of differential gain to common-mode gain.
- Effective Resistance (R_E')
The resistance seen at the common-emitter node in a differential amplifier, which can significantly affect performance.
- Differential Amplifier
An amplifier that outputs a voltage proportional to the difference between its two input voltages.
Reference links
Supplementary resources to enhance your learning experience.