Enrol to start learning
Reading is open to everyone. Enrolling is free, and it is what unlocks the audio lessons, practice tests and progress tracking.
21.4. Indian Institute of Technology, Kharagpur
This section
Practice test
10 questions on this section. Wrong answers show you what to read again.
Sign up to take itWhole chapter
Revision test
Mixed questions from across the chapter. Your answers get marked.
Sign up to take itQuick
Flashcard drill
2 cards from this lesson. Good the night before a test.
Try these first
- 1.
What is the concept of linearization in electronics?
Hint
Think about behavior near a certain point.
- 2.
What does the term gm stand for?
Hint
It's a measure of control in a transistor.
- 3.
What does small signal model represent?
- A static model of the circuit
- A model focusing on linear variations
- An entire circuit model including DC
Hint
Think about signals that are not constant.
- 4.
Is transconductance a measure of a MOSFET's efficiency?
- True
- False
Hint
What does gm express?
- 5.
You have a MOSFET with ID = 1 mA and Vgs = 2V. Calculate gm if Vth is known to be 1V. Analyze if this improvement in gm can amplify a signal.
Hint
Look for the role of Vth when calculating gm.
- 6.
If a circuit containing a MOSFET has a derived small signal gain of -10 and the input voltage is 10mV, what is the output?
Hint
Negative gain indicates an inversion; be careful with signs.
Exercises
Total Questions
2
Estimated Time
4 min
Passing Score
70%
Instructions
- Read each question carefully
- You can use hints if you need help
- Complete all questions before submitting
4 more questions available
Enrol freeQuiz
Total Questions
2
Estimated Time
4 min
Passing Score
70%
Instructions
- Read each question carefully
- You can use hints if you need help
- Complete all questions before submitting
Get your answers marked and your progress tracked
Enrol freeChallenge Problems
Total Questions
2
Estimated Time
4 min
Passing Score
70%
Instructions
- Read each question carefully
- You can use hints if you need help
- Complete all questions before submitting