Practice Angle Of Swing (1.14) - Construction Methods and Equipment Management

Practice: Angle of Swing

Lesson 1.14Construction Methods and Equipment Management

Practise this section

9 questions

Flashcard drill
2 cards from this section. Quick, good the night before a test.
Exercise
6 questions · about 4 min · pass mark 70%. Hints available.
Sign up to start the exercise
Quiz
3 questions · about 2 min · pass mark 70%. Hints available.
Sign up to start the quiz

6 sample questions

Question 1.
What does the angle of swing refer to?
Show hintHide hint
Think about the operation movements of the bucket.
Question 2.
What is cycle time?
Show hintHide hint
Consider how long one cycle from digging to dumping takes.
3Question 3.
What is the angle of swing?
- The elevation angle of the bucket
- The horizontal angle during operation
- The angle of the truck
Show hintHide hint
Consider how the bucket moves horizontally.
4Question 4.
True or False: The proximity of the truck does not affect loading efficiency.
- True
- False
Show hintHide hint
Think about how far the equipment has to move.
Question 5.
Given a scenario where an excavator takes 3 minutes to load and dump at a 30-degree swing angle, how would changing it to 15 degrees potentially reduce cycle time? Provide a detailed justification based on operation dynamics.
Show hintHide hint
Think about why certain angles minimize operational distances.
Question 6.
A site has two excavators: one optimized for clay (heavy material) and one for sand (light material). Analyze how the angle of swing should be adjusted for optimal effectiveness for both materials in different scenarios.
Show hintHide hint
Think about the characteristics of the materials and how they impact loading.

5 more questions in this section. Enroll free to practise them all.