2.1 - Series Circuits
Enroll to start learning
Youβve not yet enrolled in this course. Please enroll for free to listen to audio lessons, classroom podcasts and take practice test.
Interactive Audio Lesson
Listen to a student-teacher conversation explaining the topic in a relatable way.
Introduction to Series Circuits
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Welcome, everyone! Today, weβll talk about series circuits. In a series circuit, all components are connected end-to-end, forming a single path for current flow. Can anyone tell me what happens to the current in a series circuit?
Is it the same everywhere in the circuit?
Exactly! The current is the same through each component. This is because thereβs only one path for the electrons to flow. Now, who can remind us how to calculate total resistance in a series circuit?
We just add up all the resistances, right?
Yes! So if you have R1, R2, and R3 in series, the total resistance R_total is R1 + R2 + R3. Great job, everyone!
Calculating Current and Voltage Drops
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Now, let's calculate the current and voltage drops in a series circuit. Letβs say we have three resistors: R1 is 100Ξ©, R2 is 220Ξ©, and R3 is 60Ξ© connected to a 12V battery. How do we start?
First, we need to find the total resistance!
Correct! So, R_total = 100 + 220 + 60, which equals 380Ξ©. What is the current through the circuit?
I = V/R, so I = 12V / 380Ξ©, which is about 0.0316A!
Excellent! Now, can someone tell me how we can find the voltage across R1?
Itβs V1 = I * R1, so V1 = 0.0316A * 100Ξ©, which is approximately 3.16V.
Great teamwork! So, we can see the effect of each resistor on the overall circuit voltage.
Impact of Changing Resistor Values
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Letβs consider what happens if we replace R2 with a 470Ξ© resistor. Who can help me calculate the new total resistance?
If R2 is now 470Ξ©, then R_total is 100 + 470 + 60, which equals 630Ξ©.
Exactly! And what would be the new current in the circuit?
It would be I = 12V / 630Ξ©, which is about 0.0190A.
Spot on! Now, how would the voltage across R3 change?
We would use V3 = I * R3, so V3 would now be 0.0190A * 60Ξ©, which is about 1.14V.
Exactly right! The voltage across R3 has decreased, which shows the dimming effect on a bulb, for example.
Introduction & Overview
Read summaries of the section's main ideas at different levels of detail.
Quick Overview
Standard
In this section, students learn about the characteristics of series circuits, how resistance varies with different components, and how to apply Ohmβs Law to calculate total resistance, current, and voltage drops across individual resistors.
Detailed
In-depth Summary
In Section 2.1, we explore series circuits in detail, focusing on how electrical componentsβsuch as resistorsβare connected in a single pathway for current flow. Each component in a series circuit experiences the same current, while the total voltage across the circuit is the sum of the individual voltage drops across each component. The total resistance in a series circuit is calculated by the sum of all individual resistances:
R_total = R_1 + R_2 + ... + R_n.
This section includes a practical worked example demonstrating the calculation of total resistance, current, and voltage drops in a series circuit with three resistors. Further, students engage with a scenario where one resistor is replaced with a different value, highlighting the impact on total resistance and current. Understanding these principles is crucial for analyzing more complex circuits and for real-world applications in electronics.
Audio Book
Dive deep into the subject with an immersive audiobook experience.
Understanding Series Circuits
Chapter 1 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
Theory: Components share current; total resistance R_total = Ξ£R_i; voltage divides: V_i = IΓR_i.
Detailed Explanation
In series circuits, all components are connected end-to-end, so the same current flows through each component. The total resistance of the circuit is the sum of the resistances of each component. For example, if you have three resistors (R1, R2, R3), the total resistance is calculated by simply adding them together: R_total = R1 + R2 + R3.
Additionally, the voltage across each component can be found using Ohm's Law: V_i = I Γ R_i, where I is the constant current flowing through the circuit and R_i is the resistance of each individual component.
Examples & Analogies
Think of it like water flowing through a series of connected pipes. The total pressure drop (voltage) from the source is split among each pipe (component) based on how narrow each pipe is (resistance). If one pipe is narrower (higher resistance), it will take a larger share of the pressure drop.
Calculating Total Resistance
Chapter 2 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
Worked Numerical Example:
Components: R1=100 Ξ©, R2=220 Ξ©, R3=60 Ξ© across 12 V.
1. R_total = 100+220+60 = 380 Ξ©.
Detailed Explanation
To compute the total resistance in a series circuit, simply add the resistances of each component. In this case, we have three resistors: R1 = 100 Ξ©, R2 = 220 Ξ©, and R3 = 60 Ξ©. Adding these gives us a total resistance of R_total = 100 + 220 + 60 = 380 Ξ©. This total resistance affects how much current will flow through the circuit when a voltage is applied.
Examples & Analogies
Imagine you have three obstacles in a line (like barriers in a race). The total difficulty (resistance) faced by a runner (the current) is the sum of each barrier's difficulty. If all barriers were removed, the runner could move faster (more current with less resistance).
Current in Series Circuits
Chapter 3 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
- I = 12/380 β 0.0316 A.
Detailed Explanation
Once we have our total resistance, we can determine the current flowing through the circuit by applying Ohm's Law. Using a voltage supply of 12 V and our calculated total resistance of 380 Ξ©, we find the current: I = V/R = 12 V / 380 Ξ© β 0.0316 A. This means that approximately 31.6 mA of current flows through the entire circuit.
Examples & Analogies
Think about water flowing through a garden hose. If the hose is narrow (high resistance), only a small amount of water (current) can flow through, even if you have a strong water pump (voltage). The total pressure given by the pump is divided among the restrictions of the hose.
Voltage Across Components
Chapter 4 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
- V1 = 0.0316Γ100 β 3.16 V; V2 = 0.0316Γ220 β 6.95 V; V3 = 0.0316Γ60 β 1.90 V; sum β 12 V.
Detailed Explanation
To find the voltage drop across each resistor in the series circuit, we again use Ohm's Law: V_i = I Γ R_i. For the resistors R1, R2, and R3:
- V1 = 0.0316 A Γ 100 Ξ© β 3.16 V
- V2 = 0.0316 A Γ 220 Ξ© β 6.95 V
- V3 = 0.0316 A Γ 60 Ξ© β 1.90 V
Adding these voltages together gives us the total voltage supplied, which confirms our calculations are correct (3.16 V + 6.95 V + 1.90 V β 12 V).
Examples & Analogies
Imagine youβre sharing a pizza with friends. Each piece represents a voltage drop that adds up to the whole pizza. If friend One takes a slice worth 3.16 pieces, friend Two takes 6.95 pieces, and friend Three takes 1.90 pieces, together they have the full pizza (12 pieces), demonstrating how the total voltage is shared among all components in the circuit.
Effects of Changing Components
Chapter 5 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
Varying a Component: Replace R2 with 470 Ξ© β R_total_new = 100+470+60 = 630 Ξ©;
I_new = 12/630 β 0.0190 A; V3_new = 0.0190Γ60 β 1.14 V (bulb dims further).
Detailed Explanation
When you change a component, such as replacing R2 with a resistor of higher value (470 Ξ© instead of 220 Ξ©), the total resistance of the circuit increases. Calculating the new total resistance: R_total_new = 100 + 470 + 60 = 630 Ξ©. Using Ohm's Law again under the new conditions, we find the new current: I_new = 12 V / 630 Ξ© β 0.0190 A. This reduced current affects how much voltage is available across each component.
For example, the new voltage across R3 with the lower current is V3_new = 0.0190 A Γ 60 Ξ© β 1.14 V, showing that the bulb will dim even more.
Examples & Analogies
Think of a water park slide where the water flow is controlled by how wide the slide openings are. If you block part of the slide (like adding a higher resistance), less water (current) can flow down, causing the water flow to be weaker. This is similar to how increasing resistance within a circuit decreases the current and overall voltage available to each component.
Key Concepts
-
Components in Series: In a series circuit, all components are part of a single path for current.
-
Current Consistency: Current remains constant across all components in a series circuit.
-
Voltage Division: The total voltage in the circuit is divided among the components according to their resistances.
-
Total Resistance Calculation: R_total = R1 + R2 + ... + Rn
Examples & Applications
Example: For a series circuit with R1 = 100Ξ©, R2 = 150Ξ©, connected to a 9V battery, R_total = 100 + 150 = 250Ξ©; I = 9V / 250Ξ© = 0.036A.
Example: If R3 = 200Ξ© is now added to the same circuit, R_total = 250 + 200 = 450Ξ©; I = 9V / 450Ξ© = 0.020 A.
Memory Aids
Interactive tools to help you remember key concepts
Rhymes
In series the current flows the same, add resistances without shame!
Stories
Imagine a single-lane road where cars (current) can only go one way until they reach their destination (the battery) after visiting several checkpoints (resistors). Each checkpoint slows them down a bit (voltage drop) but thereβs no way to avoid them.
Memory Tools
SIMPLE for Series: S = Same current, I = Increases total resistance, M = Measured voltage drops, P = Pathway is single, L = Load shares voltage, E = Every component contributes to total.
Acronyms
RESIST for remembering total resistance
= Resistors in series
= Every R adds up
= Same current
= Individual voltage drops
= Sum of voltages equals total input
= Total voltage equals sum of drops.
Flash Cards
Glossary
- Series Circuit
A type of electrical circuit in which components are connected end-to-end along a single path.
- Total Resistance
The sum of the individual resistances in a series circuit.
- Voltage Drop
The reduction in voltage across a component in a circuit due to resistance.
- Ohm's Law
A fundamental principle stating that the current through a conductor between two points is directly proportional to the voltage across the two points.
Reference links
Supplementary resources to enhance your learning experience.