Enrol to start learning
Reading is open to everyone. Enrolling is free, and it is what unlocks the audio lessons, practice tests and progress tracking.
4.2.1. Section-wise Resistance Analysis
This section
Practice test
11 questions on this section. Wrong answers show you what to read again.
Sign up to take itWhole chapter
Revision test
Mixed questions from across the chapter. Your answers get marked.
Sign up to take itQuick
Flashcard drill
4 cards from this lesson. Good the night before a test.
Try these first
- 1.
What is the unit weight of dry earth soil given in the lecture?
Hint
Refer to the section on unit weights.
- 2.
What is the average loading time for a scraper?
Hint
Look for cycle time information.
- 3.
What is the unit weight of dry earth soil?
- 1600 kg/m³
- 1700 kg/m³
- 1660 kg/m³
Hint
Refer to the unit weight section.
- 4.
True or False: The swell factor for push-loaded scrapers is defaulted to increase by 10%.
- True
- False
Hint
Consider the impact of additional pressure on the material.
- 5.
A scraper has a heaped capacity of 30 m³. If loaded to 90% capacity with a swell factor of 0.85, what is the effective bank volume?
Hint
Remember to apply the swell factor after calculating the load volume.
- 6.
If one pusher can support 5 scrapers, what should their combined cycle time for optimal efficiency be if each scraper cycles 8 minutes?
Hint
Consider how cycle times overlap to maintain constant work.
Exercises
Total Questions
2
Estimated Time
4 min
Passing Score
70%
Instructions
- Read each question carefully
- You can use hints if you need help
- Complete all questions before submitting
4 more questions available
Enrol freeQuiz
Total Questions
2
Estimated Time
4 min
Passing Score
70%
Instructions
- Read each question carefully
- You can use hints if you need help
- Complete all questions before submitting
1 more question available
Enrol freeChallenge Problems
Total Questions
2
Estimated Time
4 min
Passing Score
70%
Instructions
- Read each question carefully
- You can use hints if you need help
- Complete all questions before submitting