Microprogrammed Control - Basic Concepts
Interactive Audio Lesson
Listen to a student-teacher conversation explaining the topic in a relatable way.
Introduction to Microprogrammed Control
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Today, we are going to explore microprogrammed control. Can anyone explain what microprogrammed control is?
Is it a way for the Control Unit to execute commands more flexibly?
Exactly! Instead of hardwired circuits generating control signals, we have stored sequences of control signals in memory. This allows for much greater flexibility. Think of it like programming a small computer inside the main CPU.
So each machine instruction has a corresponding microprogram?
Yes, when a machine instruction is fetched, its opcode identifies where to start in the control memory to find its microprogram. Each microinstruction specifies actions for the CPU to take.
What happens if thereβs a complex machine instruction?
Good question! Complex instructions can be broken down into many steps represented by multiple microinstructions. This flexibility enables efficient handling of complex operations.
Can we change or update the microprogram easily?
Absolutely! We can modify the microprogram in the Control Memory without altering the hardware, making it easier to add new instructions or correct bugs.
To summarize, microprogrammed control adds flexibility and ease of modifications, allowing for complex instruction execution without needing intricate hardwired logic.
Structure of Microinstructions
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
Letβs dive into the microinstruction itself. What do you think makes up a microinstruction?
It probably has control signals in it, right?
Exactly! A microinstruction consists of control fields specifying which micro-operations to perform. Can anyone think of an example of a micro-operation?
Loading data into a register?
Correct! Additionally, each microinstruction includes a next-address field which guides the CU to the next microinstruction. This is crucial for controlling the flow of execution.
What about processing conditions?
Great point! Thereβs also a condition test field that checks flags in the CPUβs Status Register. This allows microprograms to branch based on conditions, just like in high-level programming.
So, the microinstructions dictate everything about the execution process?
Exactly! Each microinstruction details what happens in a single clock cycle, ensuring each operation runs smoothly.
In summary, microinstructions consist of control fields, next-address information, and condition tests that collectively manage the micro-operation execution and branching logic.
Control Memory and the Executing Process
π Unlock Audio Lesson
Sign up and enroll to listen to this audio lesson
How does the CU know which microinstruction to execute next?
It uses the Control Address Register, right?
That's correct! The CAR holds the address of the current microinstruction being executed from the Control Memory. Once a microinstruction is fetched, it goes into the Microinstruction Register (MIR).
What happens once the microinstruction is in the MIR?
The MIR decodes the control signals and executes operations on the CPU's data path. It also determines the next address to fetch by interacting with the microprogram sequencer.
What does the sequencer do specifically?
The sequencer calculates the next microinstructionβs address. It can increment the CAR or load a given address based on conditional tests from the current microinstruction.
So, the CU continually fetches and executes microinstructions in a loop?
Exactly! This loop continues until the entire microprogram for that machine instruction is completed.
To recap, the CAR, MIR, and microprogram sequencer collaborate to fetch and execute microinstructions sequentially, allowing the CU to handle complex instructions with precision.
Introduction & Overview
Read summaries of the section's main ideas at different levels of detail.
Quick Overview
Standard
This section describes the microprogrammed control approach, which contrasts with hardwired control by storing control sequences as microinstructions in control memory. The microprogrammed Control Unit (CU) functions like a miniature processor, executing a series of microinstructions based on the opcode of machine instructions, facilitating complex instruction handling.
Detailed
In microprogrammed control, the Control Unit (CU) employs a different paradigm by storing control logic as sequences of microinstructions found in a dedicated Control Memory (CM). Unlike hardwired control, where signals are generated through fixed circuitry, this approach allows for greater flexibility and easier updates. When a machine instruction is fetched, its opcode is translated into a starting address in the Control Memory containing the corresponding microprogram. The CU executes these microinstructions sequentially, where each microinstruction defines specific control signals for execution. The microinstruction structure comprises control fields, next-address fields, and condition testing fields, allowing for sophisticated branching and control workflows within the execution of machine instructions.
Audio Book
Dive deep into the subject with an immersive audiobook experience.
Concept of Microprogrammed Control
Chapter 1 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
Microprogrammed control offers a fundamentally different and often more flexible approach to designing the Control Unit, especially when dealing with complex Instruction Set Architectures (ISAs). Instead of building the control logic as a fixed network of gates, it stores the control sequences as "programs" in a special, fast memory internal to the CPU.
Detailed Explanation
Microprogrammed control changes how we design the Control Unit (CU). Instead of hardwired logic circuits that always produce the same set of control signals based on input, microprogrammed control uses a memory storage system to hold sequences of commands (called microprograms). Each command in the microprogram tells the CU to perform specific actions based on the command being processed. This flexibility allows the CPU to adapt easily to different machine instructions by simply changing the microinstructions stored in the memory.
Examples & Analogies
Think of the CU as a chef who can follow different recipes. In a hardwired control design, the chef can only prepare one dish the same way every time, regardless of what people want to eat. But in a microprogrammed control design, this chef has a cookbook with many recipes. Depending on the dish requested (the machine instruction), the chef can grab the corresponding recipe (microprogram) and follow it step by step to create that dish.
Microinstruction Definition
Chapter 2 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
A microinstruction is the fundamental building block of a microprogram. It is essentially a very wide binary word (often ranging from dozens to hundreds of bits) that is retrieved from the Control Memory. Each microinstruction contains distinct fields designed to control various aspects of the CPU's operation for a single clock cycle.
Detailed Explanation
Microinstructions are the basic units in a microprogram, similar to single sentences in a recipe. Each microinstruction is a long binary number composed of various fields that dictate certain actions. For example, one field may tell the ALU to perform an addition, while another field specifies which registers to work with. These binary fields can represent different control signals that the CU will activate in the current clock cycle.
Examples & Analogies
Imagine each microinstruction is like a single line in a recipe that instructs the chef to perform a specific taskβsuch as chopping vegetables or boiling water. Each task is essential to complete the overall dish. Just as a chef follows each step of the recipe, the CU executes each microinstruction one after the other to carry out the machine instruction itβs processing.
Microprogram Execution Flow
Chapter 3 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
The Control Unit then begins executing this microprogram. It fetches the first microinstruction, activates the specified control signals, determines the next microinstruction address, fetches that, and so on, until the entire machine instruction's functionality has been completed.
Detailed Explanation
Execution of a microprogram involves a continuous loop where the Control Unit fetches each microinstruction from the Control Memory. It activates the necessary control signals indicated by the fetched microinstruction, then checks the next address to find which microinstruction to execute next. This process repeats for each microinstruction until the entire sequence for the machine instruction is executed, returning to the 'fetch next machine instruction' routine once done.
Examples & Analogies
Consider this flow akin to following multiple steps in a complex recipe. The chef follows the first step (fetching the instruction), implements the action (activating control signals), and then moves to the next step based on what was just completed. This keeps repeating until the dish is finished and ready to serve, at which point the chef begins again with a new order.
Control Address Register (CAR)
Chapter 4 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
This is a special internal register within the Control Unit, completely separate from the main CPU's Program Counter (PC). Its sole purpose is to hold the memory address of the current microinstruction being fetched from the Control Memory.
Detailed Explanation
The Control Address Register (CAR) works similarly to the Program Counter in a CPU but operates at a lower level, focusing only on microinstructions. Each time a new microinstruction is needed, the CAR provides the address of that microinstruction from Control Memory. It updates its address based on the flow of the microprogram, whether thatβs sequentially or through branching.
Examples & Analogies
Think of the CAR like a page number in a book that tells the reader which page to look at next. As you read through the book (execute the microprogram), you keep turning to the next page (address of the next microinstruction) based on the sequence of the story (the logic of the microprogram).
Sequencing Capabilities
Chapter 5 of 5
π Unlock Audio Chapter
Sign up and enroll to access the full audio experience
Chapter Content
Just like main programs, microprograms need flexible control flow mechanisms to execute complex machine instructions, handle exceptions, or respond to dynamic conditions.
Detailed Explanation
Microprograms are designed to handle complex tasks and situations. To achieve this, they incorporate mechanisms for both sequential and conditional branching. After each microinstruction is executed, it can either move on to the next one sequentially or conditionally jump to another section based on certain flags or conditions, similar to how a story can change direction based on the plot.
Examples & Analogies
Consider a video game where the player can choose paths based on decisions made during the game. The narrative can go in different directions depending on player choices (conditional branching), and the game continues from the chosen point (sequencing). This flexibility allows for complex game scenarios, just as microprograms need to adapt their operations based on conditions they encounter.
Key Concepts
-
Microprogrammed Control: A flexible Control Unit design storing control sequences in memory.
-
Microinstruction: The basic unit of a microprogram defining operations for a clock cycle.
-
Control Memory: Memory that holds microinstructions for execution by the Control Unit.
-
Control Address Register: Stores address of the current microinstruction being executed.
-
Microprogram Sequencer: Manages the flow of microinstruction execution.
Examples & Applications
An example of a microinstruction could be loading a register with data, where specific bits in the microinstruction are activated to perform that action.
For a complex operation like multiplying two numbers, the instruction might be broken into several microinstructions that load operands, execute the multiplication, and store the result.
Memory Aids
Interactive tools to help you remember key concepts
Rhymes
Microprograms stored away, control signals at play!
Stories
Imagine a tiny assistant inside the CPU, fetching tiny tasks from a special memory to complete complex instructions step by step.
Memory Tools
MIR CAR: Microinstruction Register leads the Control Address Register's steps in sequence.
Acronyms
MUMS
Microprogrammed Unit Makes Sequences control the unit effectively.
Flash Cards
Glossary
- Microprogrammed Control
A control unit design method where control logic is stored as sequences of microinstructions in memory.
- Microinstruction
A low-level instruction within a microprogram that specifies control signals for a clock cycle.
- Control Memory (CM)
A special memory area that stores microinstructions used by the Control Unit.
- Control Address Register (CAR)
The register that holds the address of the current microinstruction being fetched from control memory.
- Microinstruction Register (MIR)
The register that holds a fetched microinstruction during its execution.
- NextAddress Field
A field within a microinstruction that specifies the address of the next microinstruction to execute.
- Condition Test Field
Part of a microinstruction that checks specific flags in the CPU's Status Register to dictate control flow.
Reference links
Supplementary resources to enhance your learning experience.